Logo Platform
logo amplifiers simplified

Invading with Disharmony?

Copied to clipboard!
12 years ago
Jul 9, 2013, 9:19:35 PM
What is used for the time caculation MP or invasion power? The manual, wiki and the forum are telling me three different things. Do I need lots of MP with a little invasion power or lots of invasion and little MP?



For the bombs, do the fighters/bombers need to be of equal number too the bombs and do they need to be on the same ships?
0Send private message
12 years ago
Jul 3, 2013, 7:46:41 PM
Daniel.Drache wrote:
When my siege Dux fleet (with 4 or 5 Siege module per ship) arrives at an enemy system with no defensive fleets, I can click the circle with the 3 arrows in the bottom left of the screen

that pops up 2 options Bombing & troop deployment which are greyed out because I don't have any bombs or troops

But my fleet or 4 of Siege Dux (With 16 or so Siege modules per fleet) invade the system using the invasion power they get from the Siege module & only the Siege Modules.





I have never had a message saying I don't have enough invasion power, If I don't have many ships (aka much Invasion power) the timer that appears beside the system name is 999 (meaning 999 turns til I conquer the system)




Thats exactly what I meant. Without enough invasion power, you might as well not bother invading.
0Send private message
12 years ago
Jul 4, 2013, 3:06:53 AM
I just tried it and it seems to work now.

Last time I tried I was told I didnt have enough invasion rating to do it.

Dont know what the issue was.
0Send private message
12 years ago
Jul 4, 2013, 3:32:49 AM
Bansheedragon wrote:
I just tried it and it seems to work now.

Last time I tried I was told I didnt have enough invasion rating to do it.

Dont know what the issue was.




That happened to me when my fleet had no fighters/bombers/troopers to deliver the bombs.
0Send private message
12 years ago
Jul 4, 2013, 3:10:46 PM
Daniel.Drache wrote:
I made Dux (Horatio Cruiser) with 1 of each weapon & 1 of each defense, a repair module & the rest was siege weapons,

A fleet of them are able to conquer a system after 20-30 turns, adding a couple more fleets lowered the time to 10-20



Troops are for invading, Bombs are for bombing, siege weapons invade with just selecting invade without selecting bombing/troops

as alex12345 said a siege power of 10k or more is needed to get the total invasion time under 10 turns.

Although I think it's a bit of an exponential curve for lessening the time, ie 1 fleet of my Siege Duxs takes 60 turns, 2 fleets take 20 turns, 3 fleets take 16 turns, 4 fleets don't lower the time at all, 5 fleets took it to 15 turns





If I'm wrong someone correct me




A siege power of 10K and it still takes 10 rounds!? It might be nice to know the minimum from a popup when you're trying to invade. Simply saying you invasion force is not strong enough is so lazy IMO. Give me an exact number.



catwhowalksbyhimself wrote:
The siege button is strange. When you click it, it pops up the bomb and invade buttons, but also starts the process of invading a system the old way. There should be a third button here, because I too thought I was being given no choice to invade. The invade button that pops up is NOT the one you want. That's for troops dropping. Since you have no troops, you can't use it. The button you pressed to pop up that option is actually the right one. If you see the pop ups, the invasion is in progress.



Very confusing. There should be a third pop up button for this.




I second that.
0Send private message
12 years ago
Jul 6, 2013, 1:56:55 AM
I'm running a race based on UE, doing well in general, but invasions are taking a long time. In an effort to reduce invasion time, I researched battleships and cluster munitions. I've attacked various systems with ships with both siege troops and bombs, but I keep seeing the bomb button grayed out, as in the attached image. It keeps saying I don't have enough invasion power to bomb, yet I have far more than the defense.



Can anyone tell me what is going on? I did notice above about not having fighters/bombers/troops to deliver the bombs. I have researched fighters but not bombers yet. However, none of my ships carry any fighters yet. So the fleet in the image has no fighters or bombers.



Can someone confirm you really do need to have fighters or bombers aboard to use these cluster munitions?

It's really frustrating that I can't seem to use my bombs.
0Send private message
12 years ago
Jul 6, 2013, 3:26:14 AM
You require fighters/bombers/troopers to deliver the bombs.
0Send private message
12 years ago
Jul 7, 2013, 2:49:07 AM
Now, that's just incredibly frustrating! I've spent 3 hours looking for this answer! No where at all does it say that anything is required to deliver the bombs (the module should come with a delivery system IMHO, or at least a tooltip that says you need to buy one in excess of the bombs) which made it incredibly annoying and confusing as to why my bombs wouldn't work. I stacked my fleets up with them (to get the achievements) and they were always greyed out with the message "not enough invasion power". I had 8 siege weapons per ship + the bomb module and got that message every time, and with a total of 20k invasion power over several stacked fleets, that message makes NO sence and is very confusing.



With fighters/bombers/troops being somewhat useless (I tried fighters in 2 games and they seemed to do no damage at all) I've been avoiding using them. For the space they take up, they really need some boosts to their effectiveness.



Anyway, now that I know I ALSO need to have a delivery system... back to playing.

And of course, thanks for the help to a question that's bugged me all week long.
0Send private message
12 years ago
Jul 7, 2013, 4:39:03 PM
Just wanted to add to this that fighters do not work to deliver bombs. I tested this last night and confirm that bombers do work, but fighters do not. I'm not sure about infantry, I'll have to try them out tonight.



Seems that bombing the infrastructure is a really good tactic that I will be using, as destroying the defencive buildings heavily speeds up the invasion times. At one point I destroyed all 20 buildings on a planet in one turn with 1 fleet and the timer went from 18 turns to 6.
0Send private message
12 years ago
Jul 7, 2013, 10:21:33 PM
Fighter do work, but they cannot be battle fighters.



They need invasion power to do it.
0Send private message
12 years ago
Jul 8, 2013, 4:35:51 PM
Yes, fighters with at least a little invasion power can deliver bombs. Troops can't do it at all. I don't know if you need an absolute amount of invasion power or a relative amount to your target for bombs to work, though.
0Send private message
12 years ago
Jul 3, 2013, 7:43:41 PM
When my siege Dux fleet (with 4 or 5 Siege module per ship) arrives at an enemy system with no defensive fleets, I can click the circle with the 3 arrows in the bottom left of the screen

that pops up 2 options Bombing & troop deployment which are greyed out because I don't have any bombs or troops

But my fleet or 4 of Siege Dux (With 16 or so Siege modules per fleet) invade the system using the invasion power they get from the Siege module & only the Siege Modules.





I have never had a message saying I don't have enough invasion power, If I don't have many ships (aka much Invasion power) the timer that appears beside the system name is 999 (meaning 999 turns til I conquer the system)
0Send private message
12 years ago
Jul 10, 2013, 8:33:57 AM
Only invasion power counts for invading. The more you have, the fewer turns it takes. Bombs only need to be present on one ship in the fleet doing the bombing, regardless of whether that particular ship has any planes to deliver them. I don't know if this is intended or a bug. The planes need a combined invasion power that exceeds the defences of the system's anti-aircraft guns. I don't know if you have an increased effect by having additional ships with bomb modules or if it's the number of planes that makes a difference.
0Send private message
12 years ago
Jul 10, 2013, 7:07:31 PM
any help regarding to how to refill the troops modules?

i brought my ship after invading back to home system but havn't found a button for that.
0Send private message
12 years ago
Jul 10, 2013, 7:29:29 PM
The word on the street is is that repair modules will do it, as will retrofitting the ship.
0Send private message
12 years ago
Jul 11, 2013, 1:51:44 AM
yep, troops are replenishing overtime as ship repairs. weird but that's how it works.
0Send private message
0Send private message
12 years ago
Jul 13, 2013, 5:26:14 PM
Darmvlinder wrote:
I find the new systems to be a tad confusing.




I agree.



The documentation on the new stuff has been very vague.
0Send private message
12 years ago
Aug 18, 2013, 11:36:02 PM
Ok, so I'm still a bit confused as to why bombing is grayed out. I have deployed 10 battleships with 4 heavy bomber specials each and the invasion force has over 1,000,000 invasion power, still no dice. What am I missing here?



https://dl.dropboxusercontent.com/u/30680226/Raw%20Screenshots/EndlessSpace%202013-08-18%2016-28-58-31.jpg



https://dl.dropboxusercontent.com/u/30680226/Raw%20Screenshots/EndlessSpace%202013-08-18%2016-28-34-85.jpg



EDIT: Added images as links instead of attachments for legibility.

0Send private message
11 years ago
May 5, 2014, 7:44:32 AM
Glad to see I'm not the only one with problems with the new mechanics.



For a studio that is being praised for their slick UIs, I must say that I cannot remember when I last had this much problem understanding a game...



I haven't even managed to figure out how to put the invasion modules on a ship yet. (They're all greyed out and no tooltip tells me why.)
0Send private message
?

Click here to login

Reply
Comment

Characters : 0
No results
0Send private message